Handleiding
Je bekijkt pagina 30 van 56
EN / 30
3. Fit the mounting clamp to one end of
the gas hose. Soften the end of the gas
hose to which you have attached the
clamp by placing it in boiling water for
one minute.
4. Insert the softened gas hose all the way
into the connection piece. Tighten the
clamp securely with a screwdriver.
5. You must check for leakage of the con-
nection part after connection.
EN ISO 228 G1/2” type connection
1. Insert the new sealing gasket into the
safety gas hose/pipe. Make sure the
gasket is seated correctly.
2. Secure the gas connection piece to the
appliance with using a 22 mm spanner
and place the connection piece into the
connection piece using a 24 mm span-
ner.
3. You must check for leakage of the con-
nection part after connection.
EN 10226 R1/2” type connection
1. Place the new seal in the connection
piece and make sure the seal is seated
correctly.
2. While holding the gas connection outlet
of the product fixed with a 22 spanner,
connect the interconnection piece to the
product gas outlet with a 24 spanner
and tighten securely.
3. Insert the new sealing gasket into the
safety gas hose/pipe. Make sure the
gasket is seated correctly.
4. Connect the threaded part of the safety
gas hose/pipe to the interconnector
with the 24 mm spanner and tighten se-
curely, holding the interconnector in
place with the 24 mm spanner.
5. You must check for leakage of the con-
nection part after connection.
Leakage check at the connection point
• Make sure that all knobs on the product
are turned off. Make sure that the gas
supply is open. Prepare soapy foam and
apply it onto the connection point of the
hose for gas leakage control.
• Soapy part will froth if there is a gas leak-
age. In this case, inspect the gas connec-
tion once again.
• Instead of soap, you can use commer-
cially available sprays for gas leak check.
• If there is gas leak, shut off the gas sup-
ply and ventilate the room.
• Never use a match or lighter to make the
gas leakage control.
4.4 Placing the product
1. Push the product towards the kitchen
wall.
2. Secure the safety chain you have con-
nected to the product to the wall.
3. Adjust the feet of oven
Bekijk gratis de handleiding van Hotpoint HDD6GDC2W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | HDD6GDC2W |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5556 MB |
