Handleiding
Je bekijkt pagina 9 van 55
CLEANING AND MAINTENANCE
!
WARNING
• Do not use steam cleaning equipment.
• Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (”H”) is not displayed.
Important:
• Do not use abrasive sponges or scouring pads as they may damage the
glass.
• After each use, clean the hob (when it is cool) to remove any deposits and
stains from food residue.
• A surface that is not kept suitably clean may reduce the sensitivity of
control panel buttons.
• Use a scraper only if residues are stuck to the hob. Follow the scraper
manufacturer's instructions to avoid scratching the glass.
• Sugar or foods with high sugar content can damage the hob and must be
immediately removed.
• Salt, sugar and sand could scratch the glass surface.
• Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow
the Manufacturer’s instructions).
• Spills of liquid in the cooking zones can cause the pots to move or vibrate.
• After cleaning the hob, dry thoroughly.
If the CleanProtect logo is present on the glass, the hob has been treated with
CleanProtect technology. This exclusive coating ensures excellent cleaning
results and keeps the hob surface shiny for longer.
Daily cleaning after each use is suggested.
To clean CleanProtect hobs, follow these recommendations:
• Soak the zones that need to be cleaned with water making sure to
cover the entire stained area and being careful not to drop water on
the control panel.
• For the water soaking:
• In normal conditions, wait at least 2 minutes.
• In heavy-dirt conditions, wait for at least 5 minutes.
• If the water dries on the hob it is necessary to repeat the soaking step.
• Use a non-abrasive sponge to remove deposits and dry the hob after
cleaning.
TROUBLESHOOTING
• Check that the electricity supply has not been shut o.
• If you cannot turn the hob o after using it, disconnect it from the power
supply.
• If alphanumeric codes appear on the display when the hob is switched on,
consult the following table for instructions.
Please note: The presence of water, liquid spilled from pots or any objects
resting on any of the hob buttons can accidentally activate or deactivate the
control panel lock function.
DISPLAY CODE DESCRIPTION POSSIBLE CAUSES SOLUTION
F0E1
Cookware is detected but it is not
compatible with requested operation.
The cookware is not well positioned on
the cooking zone, or it is not compatible
with one or more cooking zones.
Press On/O button twice to remove the
F0E1 code and restore the functionality
of the cooking zone. Then, try to use the
cookware with a dierent cooking zone, or
use dierent cookware.
F0E7
Wrong power cord connection. The power supply connection is not
exactly as indicated in “ELECTRICAL
CONNECTION“ paragraph.
Adjust the power supply connection
according to “ELECTRICAL CONNECTION“
paragraph.
F0EA
The control panel switches o because
of excessively high temperatures.
The internal temperature of electronic
parts is too high.
Wait for the hob to cool down before using it
again.
F0E9
The cooking zone turns o when the
temperatures are too high.
The internal temperature of electronic
parts is too high.
Wait until the cooking area has cooled o
before using it again.
F0E2, F0E4, F0E6, F0E8,
F0EC, F1E1, F2E1, F6E1,
F6E3, F7E5, F7E6
Disconnect the hob from the power supply.
Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
d E
[when the hob is off]
The hob does not switch heat up.
The functions do not come on.
DEMO MODE on. Follow the instructions in the “DEMO MODE“
paragraph.
e.g.
:
The hob does not allow a special function
to be activated.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
See paragraph “Power management“.
e.g.
[Power level lower than level
requested]
The hob automatically sets a minimum
power level to ensure that the cooking
zone can be used.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
See paragraph “Power management“.
Owner's manual
EN
Bekijk gratis de handleiding van Hotpoint HB 4860C CPNE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | HB 4860C CPNE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8123 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Touch |
| Kleur van het product | Zwart |
| Aantal vermogenniveau's | 9 |
| Ingebouwd display | Ja |
