Handleiding
Je bekijkt pagina 5 van 60
5
PROGRAMMING THE END COOKING TIME/
DELAYED START
After a cooking time has been set, starting the
function can be delayed by programming its end
time: press
until the icon and the current time
start flashing on the display.
Use or to set the time you want cooking to end
and press
to confirm.
Activate the function by turning the thermostat
knob to the temperature you require: the function
will remain paused until it starts automatically after
the period of time that has been calculated in order
forcooking to finish at the time you have set.
Please note: To cancel the setting, switch the oven off by
turning the selection knob to the position.
Delay to start functionality is not available for Grill
and Turbo Grill functions.
END OF COOKING
An audible signal will sound and the display will
indicate that the function has finished.
Turn the selection knob to select a different function
or to
to switch the oven off.
Please note: If the timer is active, the display will show “END”
alternately with the remaining time.
5. SETTING THE TIMER
This option does not interrupt or program cooking
but allows you to use the display as a timer, either
during while a function is active or when the oven is
off. Keep pressing
until the and “00:00” icon and
“00:00” start flashing on the display.
Use or to set the time you require and press
to confirm. An audible signal will sound once the
timer has finished counting down the selected time.
Notes: To cancel the timer, keep pressing until the icon
starts ashing, then use to reset the time to “00:00”.
6. AUTOMATIC CLEANING FUNCTION – PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has finished
airing) running the Pyro cycle.
Remove all accessories - including shelf guides - from
the oven before activating the function. If the oven is
installed below a hob, make sure that all the burners
or electric hotplates are switched off while running
the selfcleaning cycle.
For optimum cleaning results, remove the worst
soiling with a damp sponge before using the Pyro
function.
Avoid activating the pyro cycle cleaning in the
presence of limescale residues.
We recommend only running the Pyro function if
the appliance contains heavy soiling or gives off bad
odours during cooking.
To activate the automatic cleaning function, turn the
selection knob and the thermostat knob to the
icon.
The function will be activated automatically, the door
locked and the light inside the oven switched off:
The display will show the time remaining to the end,
alternating with “Pyro”.
Once the cycle has been completed, the door remains
locked until the temperature inside the oven has
returned to a safe level. Air the room during and after
running the Pyro cycle.
NOTES
• Do not cover the inside of the oven with
aluminium foil.
• Never drag pots or pans across the bottom
of the oven as this could damage the enamel
coating.
• Do not place heavy weights on the door and do
not hold on to the door.
Bekijk gratis de handleiding van Hotpoint HAO3 K78PSUF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | HAO3 K78PSUF |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 10114 MB |
