Handleiding
Je bekijkt pagina 4 van 50
4
shown in the relative cooking table. Always activate
the steam function when the oven is cold, and after
pouring 200 ml of drinking water into the bottom of
the cavity. To activate Steam function, the thermostat
knob needs to be turned in to position of
icon.
DAILY USE
1. SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require: the display will
light up and an audible signal will sound.
2. ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
Please note: During cooking you can change the function by
turning the selection knob or adjust the temperature by
turning the thermostat knob. The function will not start if the
thermostat knob will be on you can set the cooking time,
cooking end time (only if you set a cooking time) and a timer.
RISING
To start the “Rising” function, turn the thermostat
knob to the relevant symbol; if the oven is set to a
different temperature, the function will not start.
Please note: You can set the cooking time, cooking end time
(only if you set a cooking time) and a timer.
To start the Steam function,
pour 200 ml of drinking water
in the oven bottom.
Select the function turning
clockwise the selection knob
on the relevant icon, and
the thermostat knob in any
position between 160 and
180°C (as suggested by the
icon). The function will start
and the display will show the current time of the day.
No preheating is needed. To end the cooking, turn
the selection knob on “
”.
During Steam cooking do not open the door and
never top up the water.
Please note: Opening the door and topping up the water
during cooking may have an adverse eect on the nal
cooking result.
3. PREHEATING
Once the function starts, an audible signal and a
flashing icon
on the display indicate that the
preheating phase has been activated.
At the end of this phase, an audible signal and the
fixed icon
on the display will indicate that the oven
has reached the set temperature: at this point, place
the food inside and proceed with cooking.
Please note: Placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result.
4. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing until the icon and “00:00” start
flashing on the display.
Use or to set the cooking time you require, then
press
to confirm.
Activate the function by turning the thermostat knob
to the temperature you require: an audible signal will
sound and the display will indicate that cooking is
complete.
Please note: To cancel the cooking time you have set, keep
pressing until the icon starts flashing on the display,
then use to reset the cooking time to “00:00”. This
cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/
DELAYED START
After a cooking time has been set, starting the
function can be delayed by programming its end
time: press
until the icon and the current time
start flashing on the display.
Use or to set the time you want cooking to end
and press
to confirm.
Activate the function by turning the thermostat
knob to the temperature you require: the function
will remain paused until it starts automatically after
the period of time that has been calculated in order
forcooking to finish at the time you have set.
Please note: To cancel the setting, switch the oven off by
turning the selection knob to the position.
Delay to start functionality is not available for Grill
and Turbo Grill functions.
Bekijk gratis de handleiding van Hotpoint HAO3 K58HSU1 X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | HAO3 K58HSU1 X |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 8744 MB |
