Hotpoint HA2IE10CS80 handleiding
Handleiding
Je bekijkt pagina 2 van 16
Quick Guide
EN
2
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specic Regulation requirements.
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The dishwasher does not ll
the water.
All LEDs are
blinking rapidly
No water in the water supply or the tap
is closed.
Make sure there is water in the water supply or the tap running.
The inlet hose is bent.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dish-
washer and reboot.
The sieve in the water inlet hose is
clogged; it is necessary to clean it
After having carried out the verication and cleaning, turn o and turn on
the dishwasher and restart a new program.
Dishwasher nishes the cycle
prematurely.
Drain hose positioned too low or si-
phoning into home sewage system.
Check if end of drain hose is placed at correct height (see INSTALLATION).Check
for siphoning into home sewage system, install air admittance valve if necessary.
Air in water supply. Check water supply for leaks or other issues letting air inside.
Detergent leaks.
Depends on the liquid detergent
used and can be emphasized in case
of delay option is activated.
Small leaks will not cause machine malfunction and can be avoided by chan-
ging liquid detergent type or using tablets.
TROUBLESHOOTING
Please scan the QR code on your product in order to have more detailed information.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.hotpoint.eu and parts-selfservice.europeanappliances.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
When contacting our After-sales Service, please state the codes provided on your product’s identication plate.
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
IEC 436
:
CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS
A
A
B
C
1 2 3
4
In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
To remove the upper spray arm,
turn the plastic locking ring in
aclockwise direction.
The lower spray arm may be
removed by pulling it upwards.
LOADING THE RACKS
CAPACITY: 10 standard place-settings
CARE AND MAINTENANCE
More information in the Daily Reference Guide on website.
UPPER RACK
Load delicate and light
dishes: glasses, cups, sa-
ucers, low salad bowls.
(loading example for the
upper rack)
FOLDABLE
FLAPS WITH
ADJUSTABLE
POSITION
LOWER RACK
For pots, lids, plates,
salad bowls, cutlery
etc. Large plates and
lids should ideally be
placed at the sides to
avoid interferences
with the spray arm.
(loading example for
the lower rack)
CUTLERY BASKET
The basket is equipped with
top grilles for improved cut-
lery arrangement. The cut-
lery basket should be posi-
tioned only at the front of
the lower rack.
Knives and other utensils
with sharp edges must be
placed in the cutlery basket with the points
facing downwards or they must be posi-
tioned horizontally in the tip-up compart-
ments on the upper rack.
Bekijk gratis de handleiding van Hotpoint HA2IE10CS80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | HA2IE10CS80 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3467 MB |
