Handleiding
Je bekijkt pagina 24 van 40
EN / 24
If the first timer is not set, “12:00”
and symbol continue to flash
and your oven will not start. For
your oven to function, you must
confirm the time of day by setting
the time of day or touching the
key when it is at "12:00". You can
change the time of day setting later
as described in the “Settings” sec-
tion.
In the event of a power outage, the
time of day settings are cancelled.
It should be set again.
5.2 Initial Cleaning
1. Remove all packaging materials.
2. Remove all accessories from the oven
provided with the product.
3. Operate the product for 30 minutes and
then, turn it off. This way, residues and
layers that may have remained in the
oven during production are burned and
cleaned.
4. Wait for the oven to cool.
5. Wipe the surfaces of the product with a
wet cloth or sponge and dry with a cloth.
Before using the accessories:
Clean the accessories you remove from the
oven with detergent water and a soft clean-
ing sponge.
NOTICE: Some detergents or cleaning
agents may cause damage to the surface.
Do not use abrasive detergents, cleaning
powders, cleaning creams or sharp objects
during cleaning.
NOTICE: During the first use, smoke and
odour may come up for several hours. This
is normal and you just need good ventila-
tion to remove it. Avoid directly inhaling the
smoke and odours that form.
6 Using the Oven
6.1 General Information on Using the
Oven
Cooling fan ( It varies depending on the
product model. It may not be available on
your product. )
Your product has a cooling fan. The cooling
fan is activated automatically when neces-
sary and cools both the front of the product
and the furniture. It is automatically deac-
tivated when the cooling process is fin-
ished. Hot air comes out over the oven
door. Do not cover these ventilation open-
ings with anything. Otherwise, the oven
may overheat. The cooling fan continues to
operate during oven operation or after the
oven is turned off (approximately 20-30
minutes). If you cook by programming the
oven timer, at the end of the baking time,
the cooling fan turns off with all functions.
The cooling fan running time cannot be de-
termined by the user. It turns on and off
automatically. This is not an error.
Oven lighting
The oven lighting is turned on when the
oven starts baking. In some models, the
lighting is on during baking, while in some
models it turns off after a certain time.
If you wish the oven lamp to be on incess-
antly, select the “Oven lamp” operating
status with the function selection knob.
6.2 Using the bottom section of the
oven
You can control the lower section oven with
the function and temperature knobs be-
longing to the lower section oven.
Bekijk gratis de handleiding van Hotpoint DUH 12G1 B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | DUH 12G1 B |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3818 MB |
