Handleiding
Je bekijkt pagina 18 van 44
EN / 18
Stopping function of the wire grill
There is a stopping function to prevent the
wire grill from tipping out of the wire shelf.
With this function, you can easily and safely
take out your food. While removing the wire
grill, you can pull it forward until it reaches
the stopping point. You must pass over this
point to remove it completely.
On models with wire shelves :
On models without wire shelves :
Tray stopping function - On models with
wire shelves
There is also a stopping function to prevent
the tray from tipping out of the wire shelf.
While removing the tray, release it from the
rear stopping socket and pull it towards
yourself until it reaches the front side. You
must pass over this stopping socket to re-
move it completely.
Proper placement of the wire grill and tray
on the telescopic rails-On models with
wire shelves and telescopic models
Thanks to the telescopic rails, trays or wire
shelves can be easily installed and re-
moved. Care should be taken to place the
trays and wire shelves on the telescopic
rails as shown in the figure below.
Frying grill (Airfry) usage
Frying grill is composed of two pieces as
wire basket and wire frame where the bas-
ket will be placed. Wire basket is placed on
the wire frame in an interlaced fashion.
After placing the rear part, place the wire
basket inside the handles of the wire frame
by stretching the front a little. And remove
the wire basket by stretching the front
handle of the wire frame.
Place the frying grill in the oven so as its
short handle will face the front.
Bekijk gratis de handleiding van Hotpoint DIH 82G1A B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | DIH 82G1A B |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 2544 MB |
