Hotone Ampero II Stomp 10th Anniversary Limited Edition handleiding

Niet gecategoriseerd

Hotone

103 pagina's

PDF beschikbaar

Handleiding

Unit Mode

Hold footswitch 3 or press button in main display to switch between Patch and Stomp modes.

Patch Mode

• A “classic” mode friendly for most multi-effects

users

• Recommended to users who are new to Ampero II Stomp or who prefer classic operations

• In this mode, footswitch

function is fixed; one of the footswitch LEDs will be cyan steady to indicate selected patch

• Use footswitch 1-3 to select

between patch 1-3 in the current bank

• Press footswitch 1+2 to go to previous bank, footswitch 2+3 to go to the next bank

• In default settings, Ampero II Stomp features Wait Mode when switching banks: in this mode, the unit will stay in the current

patch (footswitch LED will keep flashing) until you choose another by tapping a footswitch

• To change bank select mode, check Controls section ( ) for detailspage 33

Stomp Mode

• Recommended to users who prefer pedalboard-like operations

• In this mode, footswitch function and LED color depend on your footswitch settings (see CTRL section on ); you can page 24

use the footswitches to toggle effects on/off, tap tempo, etc.

• Press footswitch 1+2 or 2+3

to activate bank select status: the bank will remain unchanged, so you can choose another patch

in the same bank

• In bank select status, current patch number/patch name (depending on display mode settings) will be stressed, as shown

below:

• In bank select status, press one footswitch to choose a patch, press footswitch 1+2 to go to previous bank, footswitch 2+3 to

go to the next bank; the unit will stay in the current patch (footswitch LED will keep flashing) until you choose another patch

by tapping a footswitch

• Choosing a new patch will deactivate bank select status and footswitch functions will go back to normal

Bypass

In Patch Mode, you can press on a footswitch corresponding to the current patch to bypass the unit (e.g. in P00-2, press

footswitch 2 to bypass the unit):

When the unit is bypassed, press any footswitch to go back to normal.

Ampero II Stomp supports two bypass modes: DSP Bypass and Analog Bypass. You can set unit bypass mode depending on your

needs (see GLOBAL section on ). page 30

Please note:

1. Bypassing the unit will also bypass USB Audio.

2. Ampero II Stomp features a hardware true bypass in Analog Bypass mode, which supports mono in/out, stereo in/out

configuration only (mono in/stereo out not supported).

3. In Analog Bypass mode, the phones output will be MUTED when bypassed.

PATCH

MODE

Tools

DESIGN I N S P I RATION

Bekijk gratis de handleiding van Hotone Ampero II Stomp 10th Anniversary Limited Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.