Handleiding
Je bekijkt pagina 14 van 20
14
1. Plug in the electrical cord of the unit to a wall outlet, following the
recommendaons about electrical installaon in this manual.
2. Let the cooler run with no product load for 2 hours, or let the
compressor complete three on/o cycles to assure that the
temperature inside is appropriate for the products before loading
them into the freezer.
3. When placing products in the cooler, you should leave small gaps
between one and the other to assure free circulaon of air inside the
cabinet.
4. Do not leave the door open for extended periods of me, to avoid
increased temperature of the products.
5. Do not unplug your cooler during the night, since when you turn it
back on during the day the electrical consumpon will increase.
The temperature of a refrigerator should be between +32°F (0°C) to +40°F (4°C)
The temperature of a freezer should be between -5°F (-21°C) to +5°F (-15°C)
Start up the Cabinet
Installaon the Shelves
Shelves and shelf clips (4 clips per shelf) are packed inside the cabinet prior
to shipment. Aer selecng the appropriate spacing inside the cabinet,
install shelf clips by inserng top of clip inside the pilaster and then press
the lower secon of the clip while pushing inwards unl it snaps into place.
Repeat unl all clips are in desired locaon. Place shelf on clips checking that
all four corners of shelves are leveled and supported by the four shelf clips.
Pilaster
Shelf clip
Bekijk gratis de handleiding van Hoshizaki Valiance VUF27A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | Valiance VUF27A |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2118 MB |
