Handleiding
Je bekijkt pagina 15 van 24
15
1. Plug the appliance into the electrical outlet, following the recommendaons
about electrical installaon in this manual.
2. Allow the appliance to cool down prior to loading it with food products.
3. When placing products in the appliance, you should leave small gaps between
one and the other to assure free circulaon of air inside the cabinet.
4. Do not leave the door open for extended periods of me to avoid raising the
temperature inside the cabinet.
5. Do not unplug your appliance during the night, since when you turn it back on
during the day the electrical consumpon will increase.
Factory Default Temperature Setpoint:
• Refrigerator +38°F (+3°C)
• Freezer 0°F (-18°C)
The control module dierenal is set so that the compressor turns o when
it reaches +38°F (+3°C), which is the set-point value. The compressor will turn
back on when the temperature reaches 42°F (5.5°C). Therefore, the dierenal
programmed into the control is 4.0°F (2°C).
Start up the Cabinet
1. Is the appliance level?
2. Have the front casters been locked?
3. Is the appliance in a site where the ambient temperature is as specied
below all year around?
– Refrigerators and Solid Door Freezers 45°F to 100°F (7°C to 38°C)
4. Have the minimum clearance requirements specied below been met?
5. Have the shipping carton, tape, and packing material been removed from the
appliance? Has the protecve plasc lm been removed from the exterior
panels on all models and from the interior door panels on solid door models?
6. Have the appliance and accessories been checked for shipping damage?
7. Has the power supply voltage been checked or tested against the nameplate
rang?Is the power supply a properly grounded, independent wall outlet?
Does the electrical connecon meet all naonal, state, and local code and
regulaon requirements.
8. Have the refrigerant lines been checked to make sure they do not rub or
touch other lines or surfaces? Has the condenser fan blade been checked to
make sure it turns freely? Is the compressor securely aached?
9. Have the shelves been properly installed?
10. Has the end user been given the instrucon manual, and instructed on how
to operate the appliance and the importance of the recommended periodic
maintenance?
11. Has the end user been given the name and telephone number of an
authorized service agent?
12. Has the warranty card been lled out and forwarded to the factory for
warranty registraon?
Final Checklist
Side Top Rear
0” (0 cm) 0” (0 cm) 8” (20 cm)
Bekijk gratis de handleiding van Hoshizaki Valiance VR1A-FS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | Valiance VR1A-FS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3030 MB |
