Hoshizaki Steelheart WLR67B handleiding
Handleiding
Je bekijkt pagina 9 van 40
9
B. Checks Before Installation
WARNING
Refer to the nameplate for electrical specications. The nameplate is located on
the right side wall of the cabinet interior. For more electrical connection details, see
"I.F. Electrical Connection." We reserve the right to make specication and design
changes without prior notice.
• Visually inspect the exterior of the shipping package and immediately report any damage
to the carrier. Upon opening the package, any concealed damage should also be
immediately reported to the carrier.
• Remove the shipping carton, tape, and packing material. Also remove the protective
plastic lm from both the exterior panels. If the appliance is exposed to the sun or to heat,
remove the lm after the appliance cools.
• Remove all accessory containers before discarding the packing materials. Dispose of all
packing materials in a proper and environmentally responsible manner.
• Check for missing or damaged accessories.
C. Setup
1. Remove the Appliance from the Pallet
1) Move as close to the nal location as possible.
2) Remove the 2 bolts securing the appliance to the pallet, then remove the appliance
from the pallet. Block the appliance securely at a height of 8" (20 cm) off the oor.
Place the blocks at the inside area next to the caster holes. See Fig. 2.
NOTICE! Do not place the blocks under the refrigeration area or under the doors
or drawers of the appliance. Do not lay the appliance down.
Nameplate
Fig. 1
Fig. 2
Cabinet Area
Blocks
Model Shown: ULR67B
Caster Mounting Holes
Caster Mounting Holes
Bekijk gratis de handleiding van Hoshizaki Steelheart WLR67B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | Steelheart WLR67B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3563 MB |
