Hoshizaki Steelheart UR27B-LPD3 handleiding

Koelkast

Hoshizaki

49 pagina's

PDF beschikbaar

Handleiding

B. Startup

WARNING

All parts are factory-adjusted. Improper adjustments may adversely affect safety,

performance, component life, and warranty coverage.

1) Plug the appliance into the electrical outlet. WARNING! To reduce the risk of electric

shock, do not touch the plug with damp hands. At startup, there is a slight delay

before the compressor starts.

2) Allow the appliance to cool down prior to loading it with food products. For prep table

models, the entire rail must be covered by rail dividers and pans (1/6 size, up to 6" (15

cm) deep) and the rail cover must be closed. Otherwise, the appliance will not cool

properly. Leave the pans empty until the appliance cools down. Wash the pans and

cutting board before use. WARNING! Make sure the cutting board brackets and

cutting board are secure. Otherwise, the cutting board could come off and cause

injury.

C. Controls and Adjustments

1. Temperature Reading

A thermometer with both °F and °C scales is mounted in the cabinet. See Fig. 39.

2. Adjusting the Temperature Setpoint

The appliance features a cabinet temperature control dial. The warmest setting is 1 and

the coldest setting is 9. See the table below for default settings.

Model

Default Temperature

Setting

Approximate Default

Temperature

Undercounter/Worktop Refrigerator 5 34°F (1°C)

Undercounter/Worktop Freezer 7 -5°F (-21°C)

Prep Table 5 34°F (1°C)

Temperature change between each numbered setting is 2°F (3.6°C).

Cabinet Thermometer

(located on shelf)

Cabinet Temperature Control

Dial (shown in "OFF" position)

Fig. 39

Bekijk gratis de handleiding van Hoshizaki Steelheart UR27B-LPD3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.