Handleiding
Je bekijkt pagina 29 van 41
29
Fig. 34
Up/Manual Defrost Button
Down Button
Front Panel
Control Module
Compressor Icon
Defrost Icon
Evaporator
Fan Motor
Icon
Alarm
Icon
B. Startup
WARNING
All parts are factory-adjusted. Improper adjustments may adversely affect safety,
performance, component life, and warranty coverage.
Allow the appliance to cool down prior to loading it with food products.
1) Plug the appliance into the electrical outlet. At startup, there is a slight delay before the
compressor starts. If the temperature is not displayed, press the "U" button for 1 sec.
WARNING! To reduce the risk of electric shock, do not touch the plug with damp
hands.
C. Controls and Adjustments
1. Temperature Display
The cabinet temperature is displayed on the control module. See Fig. 34. The display is
in °F. To convert from °F to °C, see "II.C.3. Changing the Temperature Display Scale (°F
or °C)."
Service Button
ON/OFF
Button
2. Adjusting the Temperature Setpoint
The temperature setpoint is the value for the cabinet temperature. The temperature
differential for the compressor to turn on is ±1.8°F (±1°C) of the temperature setpoint.
The compressor turns off at 1.8°F below setpoint. For example, for a refrigerator
temperature setpoint of 34°F (1.1°C), the compressor comes on at 35.8°F (2.1°C) and
the compressor goes off at 32.2°F (0.1°C). If necessary, adjust the temperature setpoint
temperature as follows:
1) To change the temperature setpoint, press the down button briey and then release.
SP1 ashes for a few seconds, then the current temperature setpoint appears. Press
the up or down button until the desired value is displayed. After 10 seconds or the
"P" button is pressed, the display returns to the current cabinet temperature and the
temperature setpoint is saved. NOTICE! Do not adjust the temperature setpoint
more than 2°F (1°C) at a time. Allow the temperature to stabilize for a minimum of
8hours before making further temperature setpoint adjustments.
Temperature Setpoint Range Factory Default Temperature Setting
28°F to 45°F (-2.2°C to 7.2°C). 34°F (1.1°C)
Bekijk gratis de handleiding van Hoshizaki Steelheart PR46A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | Steelheart PR46A |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3640 MB |
