Hoshizaki FS-1022MLJ-C handleiding

38 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 25 van 38
25
H. Bin Control Check
An infrared sensor is used as the primary bin control to control the level of ice in the
dispenser unit/ice storage bin. A mechanical proximity switch is used as a backup bin
control.
IMPORTANT
• Make sure the icemaker has been installed as outlined in this manual and that the
water supply is on.
• Conrm S2 dip switch 7 is in the "ON" position. This allows the control board to
monitor the infrared sensor along with the mechanical backup bin control.
1. Bin Control 1 (Infrared Sensor)
1) If not already removed, remove the front panel, top panel, and control box cover.
2) Make sure the power switch is in the "OFF" position and that the power supply is off.
3) Conrm that control board S2 dip switch 1, 2, and 3 are in the proper position for your
application. See "II.H.3. Infrared Sensor Shutdown Delay."
4) Move the control switch to the "ICE" position, then move the power switch to the "ON"
position.
5) Turn on the power supply to start the automatic icemaking process. Conrm the control
board green "POWER" LED and the infrared sensor green LED turn on. These 2 LEDs
conrms 24VDC power to the infrared sensor.
6) Make sure the "GM" LED on the control board is on. See Fig. 10. There is a delay of
at least 30 seconds before the "GM" LED turns on after power-up. After the "GM" LED
turns on, press the "SERVICE" button on the control board to bypass the 5-minute
compressor delay. WARNING! Risk of electric shock. Care should be taken not to
touch live terminals. Conrm the "COMP" LED turns on.
Fig. 10
Control Board
"BIN FULL" LED
"COMP" LED
"GM" LED
"POWER" LED
S2 DIP SWITCH
"ALARM" LED
"SERVICE" Button
K6 - Connector for
Infrared Sensor
Part Number
Label: 2A9874-01

Bekijk gratis de handleiding van Hoshizaki FS-1022MLJ-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHoshizaki
ModelFS-1022MLJ-C
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3317 MB