Handleiding
Je bekijkt pagina 20 van 30
20
1. Default Settings
a) Temperature Setting: 32°F.
b) Temperature Display Scale: °F.
c) Differential temperature: 6°F (3.3°C) to turn ON the Comp and CondFM.
2. Temperature Set Point
The unit comes with a factory default setpoint of 32°F. If setpoint needs to be changed,
follow the steps below.
Press the “SET” button for two seconds. You should see flashing the number 32 (this the
default set point). Release the button.
Press the “UP” or “DOWN” arrows arrows to increase or decrease the set temperature.
Then press the “SET” button to save the new set point.
Note:
The maximum value you can set in the controller is: 36°F.
If you wish to decrease the setpoint, press the DOWN arrow button until you reach the
desired value. Release the button and then press the SET button to keep, and save, the
new value.
Note:
The minimum value you can set in the controller is: 30°F.
3. Changing the Temperature Display Scale (°F or °C)
To change from °F to °C, access the controller program mode. Press and hold the "SET"
button for 5 sec. "PS" appears in the display. Release the "SET" button. Press the "SET"
button again, "0" is displayed. With the "UP" arrow button, scroll until "22" is displayed,
then press the "SET" button. "PS" is displayed. With the "DOWN" arrow button, scroll until
Bekijk gratis de handleiding van Hoshizaki CC50-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | CC50-S |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3862 MB |
