Handleiding
Je bekijkt pagina 14 van 30
14
control system operation. No adjustment is required; the controller has the adjustment from
factory.
In the event the cabinet thermistor reading is out of range (E0 alarm), the compressor
operates on a fixed time basis of 20-min. on and 15-min. off.
To check thermistor resistance, follow the steps below.
1) Move the power switch to the "OFF" position, and then unplug the appliance.
2) Remove the control box cover.
3) Disconnect and remove the thermistor.
4) Check the resistance between the wires at the thermistor. Normal reading is within 10 kΩ
at 77°F of ambient.
6) Reconnect and replace the thermistor in its correct position. See "IV.B. Important Notes for
Component Replacement".
7) Plug the appliance back in. Move the power switch to the "ON" position.
E. Diagnostic Tables
Check for correct appliance installation per the instruction manual and proper voltage per
appliance nameplate.
Bekijk gratis de handleiding van Hoshizaki CC50-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | CC50-S |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3862 MB |
