Hoover SM18_DL4 handleiding
Handleiding
Je bekijkt pagina 7 van 73
3
FEATURES
STORAGE/CHARGING
Unit Storage
The product is designed to sit in the charging base on a at surface or vertically if wall mounted. [1]
For tidy storage wrap excess cord on the back of the charging base and exit either side or bottom.
To Wall Mount (Tools required: Screwdriver and drill)
1. Place the cardboard ruler against the mounting surface. Mark the centres of the holes.
2. Move base then drill 4.8mm holes.
3. Fit wall plugs.
4. Position base into the insert screws, and move down to ensure the base is xed rmly to the wall.
Charging & LED Indicator
Ensure the product on/o switch button is at the “OFF” position, then place the cleaner into the base, ensuring the shroud covers
the back of the product.
When the cleaner is charging, the charging LED indicator will ash to advise that the product is charging. When the product is fully
charged and is still positioned on the charger base, the icon will stop ashing and remain lit.
NOTE: Use only the charger supplied with your cleaner to recharge the unit.
IMPORTANT: When charging the appliance, the power switch must be o. Before using your cleaner for the rst time, you must
fully charge it. This will take approximately 5 hours. Never charge the batteries in temperatures above 37°C or below 0°C. It is normal
for the charger to become warm to the touch when charging.
HOW TO USE
LED DISPLAY
1. Remove the cleaner from the storage base.
2. Push the switch to ‘ON’ position to begin cleaning and to turn o move the switch to the ‘OFF’ position.
3. Empty and clean the unit and lter after each use.
4. To empty the bin pull the bin open trigger, the dust bin ap will open and stop about 45 °position for debris to empty easily. [2]
IMPORTANT: For best results clean the lter after each use.
This cleaner is equipped with a LED display. When the product is on, the display will report following information:
Battery Level Indicator:
• 4 bars = 100% charge
• 3 bars = 75% charge
• 2 bars = 50% charge
A. On/O Switch
B. LED Display
C. LED Charging Indicator
D. Removable Crevice Tool
E. Suction Inlet
F. Dust Bin Flap
G. Charger Base
H. Cardboard Ruler
I. Charger
J. Dust Brush
K. Dust Bin Open Trigger
L. Flexible Hose*
M. Crevice Brush*
*certain models only ** May vary according to model
• 1 bar = 25% charge
• 0 bar <= 5% charge
ATTACHMENTS
Removable Crevice Tool
Fit the crevice tool onto the dust cup to clean corners and hard to reach areas. [3]
GB
Bekijk gratis de handleiding van Hoover SM18_DL4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoover |
| Model | SM18_DL4 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6197 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Transparent |
| Breedte | 121 mm |
| Diepte | 161 mm |
| Hoogte | 400 mm |
| Wasbaar filter | Ja |
