Hoover HF0C3SB0FX-80 handleiding
Handleiding
Je bekijkt pagina 9 van 41
8
Drain Water Connection
Fix the water drain hose properly to
Following connections are possible:
Drain hose to sink
the piping.The hose has to reach at one
point a height between 400 and 850 mm
above the appliance bottom line.
An extension hose for the water drain
hose must not exceed a total length of 4
m and must have the same diameter as
the water drain hose.
Hang the drain hose with the
U-support over the edge of a sink
with adequate size.
Protect the U-support sufficiently
against slipping.
Drain hose to waste water connection
Drain hose to sink connection
When connecting the drain hose to a
sink trap with a drain hose spigot, make
sure that the drain hose is supported
to the height of the bench.
Ensure the drain spigot has a minimum
hole diameter of 15 mm and it has been
drilled out.
The internal diameter of the stand pipe
with vent-hole must be minimum 40 mm.
Put the drain hose for approx.80 mm
in the wastewater pipe.
Attach the U-support and secure it
sufficiently.
Installation
EU
Bekijk gratis de handleiding van Hoover HF0C3SB0FX-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoover |
| Model | HF0C3SB0FX-80 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4355 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Ingebouwd display | Ja |
| Gewicht | 40000 g |
| Breedte | 448 mm |
| Diepte | 605 mm |
