Honeywell X1N handleiding
Handleiding
Je bekijkt pagina 2 van 56
2
Removing the old thermostat
2 Check that your system is off.
Change the temperature on your
old thermostat to be above room
temperature in heat mode or below
it in cool mode. If you don’t hear the
system turn on within 5 minutes,
the power is off. Note: If you have a
digital thermostat that has a blank
display, skip this step
1 Turn power OFF.
To protect yourself and your equipment,
turn off the power at the breaker box
or switch that controls your heating/
cooling system. Note that some
systems may have separate heating
and cooling breakers.
3 Remove the old thermostat’s faceplate.
On most thermostats, you can take off the
faceplate by grasping and gently pulling. Some
thermostats may have screws, buttons, or clasps.
Do not remove any wires from your thermostat
at this time!
75
75
Breaker box
Switch
READ AND SAVE THESE INSTRUCTIONS
Tools you will need
Small flat head scr
ewdriver
Phillips scr
ewdriver
Pencil
Le
vel
M36270
Wire stripper
Needle-nose pliers
Drill and
drill bit
Tools you may need
Installation and Wiring
M39590
OFF
OFF
ON
Bekijk gratis de handleiding van Honeywell X1N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Honeywell |
| Model | X1N |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 4884 MB |
