Honeywell RTH21B handleiding
Handleiding
Je bekijkt pagina 12 van 72
12
ISU ISU Name ISU Options (factory default in bold)
4090 Smart Response
0=No
1=Yes (Smart Response is a comfort setting. Heating or cooling
equipment will turn on earlier, ensuring the indoor temperature will
match the setpoint at the scheduled time.)
4103 Minimum Heat Setpoint
32°F to 50°F Default 40°F
0°C to 10.0°C Default 4.5 °C
Do not set this lower than 40F/4.5C unless this is installed in a
location where pipes are not at risk of freezing
7110
Air Filter Replacement Reminder
(Run time only counts the
time that Heat, Cool or Fan are
running)
0 = Off
1 = 10 Run Time Days
2 = 20 Run Time Days
3 = 30 Run Time Days
4 = 45 Run Time Days
5 = 60 Run Time Days
6 = 90 Run Time Days
7 = 120 Run Time Days
8 = 150 Run Time Days
9 = 30 Calendar Days
10 =45 Calendar Days
11 =60 Calendar Days
12 =75 Calendar Days
13 =3 Calendar Months
14 =4 Calendar Months
15 =5 Calendar Months
16 =6 Calendar Months
17 =9 Calendar Months
18 =12 Calendar Months
19 =15 Calendar Months
14005 Idle screen selection
0 - Minimum Information shown
1 - Setpoint shown on idle screen
2 - Maximum display information shown
14010 Clock format 12/24
14015 Daylight Saving Time
0=Off
1=On
Installer Setup Options (ISU) continued from
the previous page
System Operation
1. Press the MODE button to cycle to
the next available System mode
2. Cycle through the modes until the
desired System mode is displayed
Available System modes vary by model
and system settings.
System modes:
• AUTO
• HEAT
• COOL
• EM HEAT
• OFF
M39511
Heat
MENU
FAN
Auto
Indoor
Hold
MODE
Settings
Bekijk gratis de handleiding van Honeywell RTH21B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Honeywell |
| Model | RTH21B |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 6641 MB |
