Handleiding
Je bekijkt pagina 17 van 76
9EN
USE AND OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
MODE CONTROL
Settings: Air Conditioning, Dehumidifying, Fan, Heating*.
The corresponding indicator light will illuminate to indicate the current mode setting.
Air Conditioning Mode (COOL)
Adjust fan speed and air temperature to suit your desired comfort level.
Set a temperature between 61°F and 88 °F (16°C - 31°C).
Note: The exhaust hoses must vent outside the room when using air conditioning mode.
•
Dehumidifying Mode (DRY)
Air is dehumidified as it passes through the unit, without being in full cooling mode.
The fan speed is preset as LOW speed and can NOT be adjusted.
Remove Exhaust Hose for Dehumidification: If the unit will be used as a dehumidifier, do not
connect the exhaust hose. Continuous drainage is then necessary (refer to Continuous Draining
for Dehumidifier Mode).
IMPORTANT: The Dehumidifier Mode is used to support moisture reduction but should not be
expected to dehumidify to the same degree as a standard dehumidifier-only appliance. The
built-in dehumidifier automatically adjusts dehumidification based on ambient room temperatures.
It is not possible to adjust to a desired humidity percentage. The front display only shows the
current and desired temperatures. It does not show humidity levels.
•
Fan Mode
For air circulation without air conditioner cooling.
•
TIMER / TEMPERATURE SET CONTROLS
The
and buttons can be used to adjust and set your desired temperature in Cooling or
Heating * modes. They can also be used to set the Timer (see "Timer Control" below).
Note: Temperature cannot be adjusted in Fan and Dehumidify modes.
Heating Mode*
When heating mode is selected the indicator light will shine. Heating is activated when the
ambient temperature is between 44°F -77°F (7°C-25°C). In this mode, the desired temperature
can be set between 61°F - 88°F (16°C -31°C).
Note: The exhaust hoses must vent outside the room when using heating mode.
Water Condensation in Heating Mode: The Heat pump draws moisture from the air which then
condenses into the internal water tank. The unit will pause operation when the tank is full and will
restart when the tank has been emptied. It is recommended to use the Heating Mode in a room
with 50% humidity or lower.
Avoid operating moisture-producing products or appliances such as a humidifier or a kettle when
using the unit in Heating Mode. See the “Draining Water Condensation in Heat Mode” section for
more information on draining the water tank.
•
*Applicable for models with heating feature only.
Bekijk gratis de handleiding van Honeywell HX2CESAWG8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Honeywell |
| Model | HX2CESAWG8 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6810 MB |
