Homematic IP HMIPW-STHD-A handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 19 van 24

19

Start-up

6.3 Installation in multiple

combinations

You can mount the temperature and

humidity sensor with the attach-

ment frame (A) provided or use it with

frames of other manufacturers as well

as integrate the electronic unit (B) into

a multi-gang frame. For mounting with

multiple combinations, make sure that

the mounting plate of the tempera-

ture and humidity sensor is seamlessly

aligned to the already fixed mounting

plate/retaining ring.

The frames of the following manufac-

turers can be used:

Manufacturer Frame

Berker S.1, B.1, B.3, B.7 Glas

Busch-Jaeger

carat*, future linear*,

solo*, Busch-axcent*,

Busch-dynasty*,

balance SI

ELSO Joy

GIRA

System 55, Standard

55, E2, E22, Event,

Esprit

merten

1-M, Atelier-M, M-

Smart, M-Arc, M-Star,

M-Plan

JUNG

A 500, AS 500, A plus,

Acreation

Kopp Athenis

*with 55 mm intermediate frames of

the manufacturer

6.4 Pairing

Please read this entire section

before starting the pair procedure.

First set up your HomematicIP

Wired AccessPoint via the

HomematicIPapp to enable ope-

ration of other HomematicIP

devices within your system. For

further information, please refer

to the operating manual of the

Wired AccessPoint.

Please refer to the Homematic IP

Wired System Manual for detailed

information on setup and control

options.

To integrate the temperature and hu-

midity sensor into your system and

enable it to communicate with other

devices, you must pair it first.

To pair the temperature and humiditiy

sensor, please proceed as follows:

• Open the HomematicIPapp on

your smartphone.

• Select the menu item “Pair device”.

• After the power supply has been

established, the pair mode of the

temperature and humidity sensor is

active for 3 minutes.

• Turn over the sensor.

• Remove the insulation strip from

the battery compartment. Pai-

ring mode remains activated for

3 minutes.

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Homematic IP HMIPW-STHD-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Homematic IP (Niet gecategoriseerd)

Handleiding bekijken

Homematic IP HmIPW-BCC

Niet gecategoriseerd - handleiding

Handleiding bekijken

Homematic IP HmIPW-BC39

Niet gecategoriseerd - handleiding

Handleiding bekijken

Homematic IP HmIPW-STH-A

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd