Homematic IP HMIPW-STHD-A handleiding
Handleiding
Je bekijkt pagina 14 van 24
14
Package contents
1 Package contents
1x
Wired Temperature and Humidity
Sensor with Display – indoor
1x Clip-on frame
1x Mounting plate
2x Screws 3.2 x 15 mm
2x Screws 3.2 x 25 mm
1x Operating manual
2 Information about this
manual
Please read this manual carefully befo-
re operating your HomematicIP Wired
component. Keep the manual so you
can refer to it at a later date if you need
to.
If you hand over the device to other
persons for use, please hand over this
manual as well.
Symbols used:
Attention!
This indicates a hazard.
Note.This section contains impor-
tant additional information!
3 Hazard information
Do not open the device. It does
not contain any parts that need to
be maintained by the user. In the
event of an error, please have the
device checked by an expert.
For safety and licensing reasons
(CE), unauthorized change and/or
modification of the device is not
permitted.
Do not use the device if there are
signs of damage to the housing,
control elements or connecting
sockets, for example. If you have
any doubts, have the device che-
cked by an expert.
The device may only be operated
in dry and dust-free environment
and must be protected from the
eects of moisture, vibrations,
solar or other methods of heat
radiation, cold and mechanical
loads.
The device is not a toy: do not
allow children to play with it. Do
not leave packaging material lying
around. Plastic films/bags, pieces
of polystyrene, etc. can be dange-
rous in the hands of a child.
We accept no liability for damage
to property or personal injury
caused by impoper use or failure
to observe the hazard warnings. In
such cases, all warranty claims are
void. We accept no liability for any
consequential damage.
When connecting to the device
terminals, take the permissible
cables and cable cross sections
into account.
The device is part of the building
installation. The relevant national
standards and directives must be
taken into consideration during
planning and set-up. The device is
intended for operation within the
Homematic IP Wired bus only. The
Homematic IP Wired bus is a SELV
power circuit. Common cable
Bekijk gratis de handleiding van Homematic IP HMIPW-STHD-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Homematic IP |
| Model | HMIPW-STHD-A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2707 MB |
