Homematic IP HmIP-WTH-B-A handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121/ 121

Afdrukken

Je bekijkt pagina 34 van 121

34

Configuration menu

with the menu button.

• Select the desired hours using the

plus or minus button and confirm

with the menu button.

• Select the desired minutes using

the plus or minus button and con-

firm with the menu button.

To confirm, the time flashes twice and

the device changes back to the stan-

dard display.

7.6 Oset temperature

As the temperature is measured on the

room thermostat, the temperature dis-

tribution can vary throughout a room.

To adjust this, a temperature oset of

±3.5 °C can be set. If a nominal tempe-

rature of e.g. 20 °C is set but the room

presents with only 18 °C, an oset of

-2.0 °C needs to be set. An oset tem-

perature of 0.0° is set in the factory

settings. To adjust the oset tempera-

ture, please proceed as follows:

• Press and hold down the menu

button (E) to open the configurati-

on menu.

• Select “Oset” via the plus and mi-

nus buttons (D+F) in the menu.

• Confirm with the menu button.

• Select the desired oset tempera-

ture using the plus or minus button

and confirm with the menu button.

To confirm, the temperature flashes

twice and the device changes back to

the standard display.

7.7 Programming a heating profile

In this menu item, you can create a

heating profile with six heating and

cooling phases (13 change settings)

according to your personal needs:

• Press and hold down the menu

button (E) to open the configurati-

on menu.

• Select “Prg” using the plus or minus

buttons (D+F) and confirm with

the menu button.

• In the menu item “dAy”, use the

plus and minus buttons to select

single days of the week, all week-

days, the weekend or the entire

week for your heating profile and

confirm with the menu button.

• Confirm the start time 00:00 pm

with the menu button.

• Select the desired temperature and

start time using the plus or minus

button and confirm with the menu

button.

• The next time is shown in the dis-

play. You can adjust the time via

the plus or minus buttons.

• Select the desired temperature for

the next time period using the plus

or minus button and confirm with

the menu button.

• Repeat this procedure until tem-

peratures are stored for the entire

period between 0:00 and 23:59 h.

To confirm, the time flashes twice and

the device changes back to the stan-

dard display.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121/ 121

Bekijk gratis de handleiding van Homematic IP HmIP-WTH-B-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Thermostaat