Holzmann TW75 handleiding
Handleiding
Je bekijkt pagina 17 van 28
SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 17
TW75_230V | TW150_230V
• Make sure that the guards are in good working order and properly maintained.
• Select a level, vibration-free surface as the installation area.
• Ensure sufficient space around the machine.
• Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
• Ensure a clean working environment.
• Keep the area around the machine free of obstacles (e.g. dust, chips, cut-off workpiece
parts, etc.).
• Only use tools that are in perfect condition and free of cracks and other defects (e.g.
deformations).
• Remove tool keys and other setting tools before switching on the machine.
• Check the machine's connections for strength before each use.
• Never leave the running machine unattended. Switch off the machine before leaving the
working area and secure it against unintentional or unauthorized restarting.
• The machine may only be operated, maintained or repaired by persons who are familiar
and who have been informed about the dangers arising from this work.
• Ensure that unauthorized persons keep a safety distance from the machine and keep
children away from the machine.
• Always work with care and the necessary caution and never use excessive force.
• Do not overload the machine.
• Hide long hair under hair protection.
• Wear close fitting protective work clothing and suitable protective equipment (eye
protection, dust mask, safety-shoes, and work gloves).
• Never wear loose jewellery, loose clothing or accessories (e.g. tie, scarf).
• Do not work on the machine if you are tired, not concentrated or under the influence of
medication, alcohol or drugs!
• Connect the machine to a suitable dust collection system.
• Do not use the machine in areas where vapours of paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
• Shut down the machine and disconnect it from the power supply, before adjustment,
changeover, cleaning, maintenance or repair work, etc. Before starting work on the
machine, wait until all tools or machine parts have come to a complete standstill and
secure the machine against unintentional restart.
12.4 Electrical safety
• Make sure that the machine is grounded.
• Only use suitable extension cables.
• A damaged or tangled cable increases the risk of electric shock. Handle the cable with care.
Never use the cable to carry, pull or disconnect the power tool. Keep the cable away from
heat, oil, sharp edges or moving parts.
• Proper plugs and outlets reduce the risk of electric shock.
• Water entry into the machine increases the risk of electric shock. Do not expose the
machine to rain or moisture.
• The machine may only be used if the power supply is protected by a residual current circuit
breaker.
• Before connecting the machine always make sure that the main switch is switched off.
• Use the machine only when the ON-OFF switch is in good working order.
12.5 Special safety instructions for this machine
• Never point the cleaning hose at other people or animals.
• Do not inhale any hazardous vapors.
• Avoid physical contact with the cleaning agent and the cleaning solution (skin, eyes).
• Only work in well-ventilated rooms.
• Keep the machine away from potential ignition sources such as open flames – risk of fire
and explosion! Do not smoke near the machine.
12.6 Hazard warnings
Residual risks
Despite intended use, certain residual risk factors remain.
• Risk of injury from contact with the cleaning agent. Always wear protective gloves.
Bekijk gratis de handleiding van Holzmann TW75, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | TW75 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5764 MB |
