Holzmann SSAT2200_230V handleiding
Handleiding
Je bekijkt pagina 16 van 29
SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 16
SSAT1000_230V | SSAT2200_230V
SAFETY
This section contains information and important notes on the safe commissioning and handling of
the machine.
For your safety, read this manual carefully before commissioning. This will enable you
to handle the machine safely and thus prevent misunderstandings as well as
personal injury and damage to property. Pay special attention to the symbols and
pictograms used on the machine as well as the safety information and danger
warnings!
12.1 Intended use of the machine
The machine is designed exclusively for the following activities:
As a sanding table for suction wood dust wood composites and plastics with similar physical
properties to wood within the technical limits.
With the optional conversion kit SSAT1000_MT and SSAT2200_MT, the suction of metal dust is
possible within the technical limits.
WARNING
The suction of magnesium and aluminium dusts is prohibited!
NOTE
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
Technical restrictions
The machine is designed for the work under the following conditions:
Relative humidity
max. 70 %
Temperature (operation)
+5 °C to +40 °C
Temperature (storage, transport)
-25 °C to +55 °C
Prohibited applications / Dangerous misuse
• Operating the machine outdoors.
• Operating the machine without adequate physical and mental fitness.
• Operating the machine without knowledge of the manual.
• Modifying the machine design.
• Operating the machine in a potentially explosive environment.
• Operating the machine outside the technical limits specified in this manual.
• Suction of liquids, vapours, combustible dusts and gases, as well as materials above 60° C
(e.g. ash).
• Removing of the safety markings attached to the machine.
• Modifying, circumventing or disabling the safety devices of the machine.
• Machining of materials with dimensions outside the limits specified in this manual.
• Cleaning the machine with water, neither with the power switched on nor with the power
switched off.
The non-intended use or the disregard of the explanations and instructions described in this
manual will result in the expiration of all warranty claims and compensation claims for damages
against HOLZMANN MASCHINEN GmbH.
12.2 User requirements
The machine is designed to be operated by one person. The prerequisites for operating the
machine are physical and mental fitness as well as knowledge and understanding of the operating
instructions. Persons who, due to their physical, sensory or mental capabilities, inexperience or lack
of knowledge, are unable to operate the machine safely must not use the machine without
supervision or instruction by a responsible person.
Please note that locally applicable laws and regulations determine the minimum age of the
operator and may restrict the use of this machine!
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the guidance and supervision of a qualified electrician.
Put on your personal protective equipment before working on the machine.
Bekijk gratis de handleiding van Holzmann SSAT2200_230V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | SSAT2200_230V |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6744 MB |