Holzmann SK90 handleiding
Handleiding
Je bekijkt pagina 26 van 31
TROUBLESHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 26
SK90_230V
Intervall
Components
Action
before usage
•
machine
•
cleaning
•
machine •
check sealing performance
once a week
• hoses
• check and replace, if damaged
if required
•
air filter
•
clean and replace, if necessary
•
blast media •
change
•
protection film from window •
change in case of clouding
16.3 Storage
Store the machine in a dry, frost-proof and lockable place when not in use. Disconnect the
machine from the power and compressed air supply. Make sure that unauthorised persons and
especially children do not have access to the machine.
NOTE
Improper storage can damage and destroy important components. Only store packed
or already unpacked parts under the intended ambient conditions!
16.4 Disposal
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or operating equipment in the residual waste.
If necessary, contact your local authorities for information regarding available
disposal options.
If you purchase a new machine or equivalent equipment from your specialist
dealer, p26-he is obliged in certain countries to dispose of your old machine
properly.
TROUBLESHOOTING
WARNING
Danger due to electrical voltage and air pressure!
Working on the machine with the power and compressed air supply still on can
lead to serious injuries or death.
Always disconnect the machine from the power and compressed air supply
before maintenance or repair work and secure it against unintentional
reconnection!!
Many possible sources of error can be eliminated in advance if the machine is properly connected
to the power (air pressure) supply.
If you are unable to carry out the necessary repairs properly and/or do not have the required
training, always consult a specialist to solve the problem.
Trouble
Possible cause
Solution
machilne does not
run
•
Sand blasting gun defective
•
repair or change if necessary
• no compressed air supply
• connect to a compressed air
supply
bad blasting result
• compress air supply performance
to low
•
adapt compressed air supply
• working air pressure to low
• increase working air pressure
•
worn, wrong blast media
•
change blast media
•
blast media hose clogged •
clean blast media hose
too much dust in the
cabin
• air filter dirty
• clean or change if necessary
• too much blast media in the cabin
• use less blast media
Bekijk gratis de handleiding van Holzmann SK90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | SK90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5952 MB |
