Holzmann EKR20M handleiding
Handleiding
Je bekijkt pagina 16 van 21
TROUBLESHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 16
EKR10M_230V | EKR20M_230V
NOTE
Incorrect cleaning products can attack the finish of the machine. Do not use any
solvents, nitro thinners or other cleaning products that could damage the machine's
finish.
Observe the specifications and instructions of the cleaning agent manufacturer.
• Make sure that the cables are in good working condition and that the insulation is not
damaged.
• Keep the housing and cables as free of dust and dirt as possible.
• Use a damp cloth and, if necessary, a mild cleaning agent for cleaning.
• Clean the cable before returning it to the housing.
• Make sure that no water gets inside the machine.
• Ensure that the cable is wound up correctly.
14.2 Storage
Store the cleaned machine in a dry, frost-proof and lockable place when not in use. Disconnect the
machine from the power supply. Make sure that unauthorised persons and especially children do
not have access to the machine.
NOTE
Improper storage can damage and destroy important components. Only store packed
or already unpacked parts under the intended ambient conditions!
14.3 Disposal
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or operating equipment in the residual waste.
If necessary, contact your local authorities for information regarding available
disposal options.
If you purchase a new machine or equivalent equipment from your specialist
dealer, p16-he is obliged in certain countries to dispose of your old machine
properly.
TROUBLESHOOTING
WARNING
Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or
death.
Disconnect the machine from the power supply before starting work to
eliminate defects!
CAUTION
Risk of injury!
Disassembly of the machine only by trained personnel.
If parts or the cable need to be replaced, contact an authorized sales outlet or a qualified
electrician
Many possible sources of error can be eliminated in advance if the machine is properly connected
to the power supply.
If you are unable to carry out the necessary repairs properly and/or do not have the required
training, always consult a specialist to solve the problem.
If the cable jams during unroll or roll up, pull the cable several times or unroll or roll up it
completely. Then try it again.
Bekijk gratis de handleiding van Holzmann EKR20M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | EKR20M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3802 MB |
