Holzmann ED1500KDIG handleiding
Handleiding
Je bekijkt pagina 87 van 215
TROUBLESHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 87
ED1000KDIG | ED1500KDIG
23 TROUBLESHOOTING
WARNING
Danger due to electrical voltage! Manipulating the machine with the power supply
up may result in serious injury or death. Before carrying out any troubleshooting work,
always disconnect the machine from the power supply and secure it against
unintentional recommissioning.
Many possible sources of error can be excluded in advance if the machine is properly connected to
the mains.
If you are unable to carry out necessary repairs properly and/or do not have the required training,
always consult a specialist to solve the problem.
Fault Possible cause Remedy
Machine does not start Machine is not connected
Fuse or contactor broken
Cable damaged
Safety device not locked
Check all electrical connections
Change fuse, activate contactor
Replace cable
Check spindle protection /
gearbox cover
Machine does not reach speed Extension cable too long
Motor not suitable for existing
voltage
weak power network
Exchange to suitable extension
cable
See switch box cover for correct
wiring
Contact electrician
Machine vibrates strongly Stands on uneven ground
Motor mounting is loose
Level new
Tighten the fixing screws
Lathe tool has a short tool life Hard cast skin
Too high cutting speed
Too large infeed
Too little cooling
Break casting skin beforehand
Choose lower cutting speed
Lower infeed (finishing
allowance)
not more than 0.5 mm)
More cooling
Cutting edge breaks out Wedge angle too small (heat
build-up)
Abrasive cracks due to incorrect
cooling
Too much play in the spindle
bearing (vibrations occur)
Select a larger wedge angle
Uniform cooling
Adjust play in the spindle
bearing. Replace tapered roller
bearing if necessary.
Turned thread is wrong Thread chisel is incorrectly
clamped or incorrectly ground
Incorrect thread pitch
Incorrect diameter
Set lathe tool to centre
Grinding angles correctly
Set the correct gradient
Pre-turn workpiece to exact
diameter
Bekijk gratis de handleiding van Holzmann ED1500KDIG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | ED1500KDIG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 66413 MB |
