Holzmann ED1500KDIG handleiding
Handleiding
Je bekijkt pagina 82 van 215
MAINTENANCE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 82
ED1000KDIG | ED1500KDIG
• Regularly check that the warning and safety labels on the machine are in perfect and
legible condition.
• Use only proper and suitable tools.
• Only use original spare parts recommended by the manufacturer.
20.1 Inspection and maintenance plan
The type and degree of machine wear depends to a large extent on the operating conditions. The
following intervals apply when the machine is used within the specified limits:
Interval Component What to do?
Before start of work or
after every maintenance or
servicing
Guideways oiling
Change Gears lubricate lightly with grease
Camlock
Clamping Bolts
Turning Spindle
Adapter
Check fastening
Feed gear
Apron
Head Stock
Visual inspection of the oil levels (via sight
glass)
Weekly
Lead Screw
Feed Shaft
Tailstock
Grease or fill all grease nipples and
lubricators with machine oil.
Top Slide
Cross Slide
Lathe Slide
Grease or fill all grease nipples and
lubricators with machine oil.
Annually or after every
1000 operating hours
Feed Gear
Apron
Head Stock
Change oil
As needed
Guideways Adjust taper gib
Head Stock Check V-belt and tighten if necessary
Coolant Fill in
20.1.1 Adjusting the taper gibs
Too much play in the guideways can be reduced by adjusting the taper gibs. To adjust, turn the
adjustment screw clockwise. This pushes the taper gibs backwards and reduces the clearance of
the respective guideway.
Bekijk gratis de handleiding van Holzmann ED1500KDIG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | ED1500KDIG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 66413 MB |
