Holzmann ED1500KDIG handleiding
Handleiding
Je bekijkt pagina 70 van 215
OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 70
ED1000KDIG | ED1500KDIG
Half nut opened
Half nut closed
Metric thread
Imperial thread
Right-hand thread and longitudinal feed to the
headstock side (left illustration)
Left-hand thread and longitudinal feed to
tailstock side (right picture)
Longitudinal feed
engaged (top)
Both feeds
disengaged (middle)
Cross feed engaged
(bottom)
Oil inlet
Do not change speed
or direction of
rotation during
operation!
Electric voltage
Intermittent push
button
Power indicator light
Emergency-Stop
18.3.2 Switching on the machine
NOTICE
Note that the machine can only be started if the EMERGENCY STOP is unlocked, the
jaw chuck guard is closed and all position switches are activated.
To switch on the machine, turn the main switch (1) to position ON
and the motor-step-switch (2) to the position "I" or "II". The main
switch of the machine is located on the back of the headstock.
When the machine is switched on, the operating control lamp
lights up permanently.
The machine is started by actuating the shift lever rotating
direction (3).
Bekijk gratis de handleiding van Holzmann ED1500KDIG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | ED1500KDIG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 66413 MB |
