Holzmann CTF45P handleiding
Handleiding
Je bekijkt pagina 26 van 58
TRANSPORT
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 26
CTF45P_230V
12.7 Hazard warnings
Residual risks
Despite intended use, certain residual risk factors remain.
• Danger of cutting hands/fingers or other parts due to sharp blades.
• Danger of cutting hands/fingers or other parts due to tool change
• Risk of injury to hands/fingers due to crusing between moving and fixed parts (X/Y/Z-axis,
spindle,.. )
• Risk of injury from the workpiece falling down of the machine.
• Danger of cutting hands/fingers on cut edges of the workpiece.
• Risk of injury if the machine tips over.
• Risk of injury due to improper maintenance work.
Hazardous situations
Due to the structure and construction of the machine, hazardous situations may occur which are
identified in this manual as follows:
DANGER
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION
A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
NOTE
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factors in the error-free operation of
the machine. Safe working depends on you!
TRANSPORT
Transport the machine in its packaging to the place of installation. To manoeuvre the machine in
the packaging, a pallet truck or forklift truck with the appropriate lifting force can be used, for
example. The specifications can be found in the chapter Technical data. For proper transport, also
observe the instructions and information on the transport packaging regarding centre of gravity,
lifting points, weight, means of transport to be used as well as the prescribed transport position
etc. Ensure that the selected lifting equipment (crane, forklift, pallet truck, load sling, etc.) is in
perfect condition. Ensure the correct body posture when lifting, carrying and setting down the
load.
Lifting / Setting down
- When lifting/setting down, ensure that you are standing firmly (legs hip-width apart).
- Lift/set down load with knees bent and back straight.
- Do not lift/set down load with a jerk.
Carrying
- Carry load with both hands as close to body as possible.
- Carry load with straight back.
- When transporting the assembled machine, ensure to lift it only by the machine body and
not by the attachments.
If you transport the machine with a vehicle, ensure that the load is secured appropriately!
ASSEMBLY
14.1 Preparation
Check delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.
Bekijk gratis de handleiding van Holzmann CTF45P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | CTF45P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13939 MB |
