Hobart PW20N-BAS handleiding
Handleiding
Je bekijkt pagina 14 van 116
– 14 –
ELECTRICAL CONNECTION(S)
Electrical and grounding connections must comply with applicable
portions of the National Electrical Code (NFPA No. 70, latest edition) and/or other
local electrical codes.
Disconnect the electrical power to the machine and follow lockout /
tagout procedures. There may be multiple circuits. Be sure all circuits are disconnected.
Connect the incoming power to the machine in accordance with the wiring diagram located
on the back of the front trim panel.
Connection Method
1. Remove the lower front panel and open the controls door by removing the three screws
at the bottom.
2. A conduit hole is supplied at the back of the machine at the base of the unit. If necessary
duetospacerequirements,usea45°tting.NOTE: Facing the front of the machine, the
conduit hole is located on the right side at the base on PW10n and PW12n models. For
PW20n models, the conduit hole is located on the left side at the base of the machine.
3. Installconduitandtting.Feedwiresthrubaseofunittofrontofunit.Keepexcesswire
in the base of the unit to a minimum.
4. Make electrical connection according to the machine data plate and the wiring diagram
supplied with the machine and secure wires to the 1TB terminal block located at the
front of the machine (Fig. 12).
* Minimum Supply Circuit Ampacity / Maximum Protective Device (Amps) compiled in accordance
with the National Electrical Code (NFPA 70), latest edition.
* * For supply connection, use wires suitable for at least 90°C or equivalent.
Model Volts Hertz Phase
Rated
Amps
Minimum
Supply Circuit
Ampacity
Maximum
Protective
Device (Amps)
Single Point Electrical
Connection
PW10n-BAS
PW10n-ADV
PW10n-ADVSW
PW12n-ADV
PW12n-ADVSW
208 / 240 60 3 49.2 / 54.5 60 / 70 60 / 70
480 60 3 29.7 35 35
PW20n-BAS
PW20n-ADV
208 / 240 60 3 60.2 / 65.5 70 / 80 70 / 80
480 60 3 36.7 45 45
ELECTRICAL DATA
Bekijk gratis de handleiding van Hobart PW20N-BAS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | PW20N-BAS |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 27655 MB |
