Hobart PW10N-ADV handleiding
Handleiding
Je bekijkt pagina 8 van 116
– 8 –
7. Disconnect the (2) water hoses connected to the energy recovery assembly.
NOTE: Ensure the hoses are connected to the proper connection points when
reinstalling. The hose from the solenoid valve connects to the top connection and
the hose from the air gap connects to the bottom connection.
8. Remove the (4) nuts securing the energy recovery assembly to the top of the chamber
and lift the energy recovery assembly off the machine.
9. Once the unit is in the dish room area, reverse the above procedure to reinstall the
energy recovery assembly.
NOTE: When reinstalling the energy recovery assembly(s), ensure the gasket(s) is
properly installed providing a proper seal.
Fig. 8
Fig. 7
DISCONNECT
WATER HOSES
REMOVE (4) NUTS
(2 OPPOSITE SIDE)
Bekijk gratis de handleiding van Hobart PW10N-ADV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | PW10N-ADV |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 27655 MB |
