Hobart PW10N-ADV handleiding
Handleiding
Je bekijkt pagina 17 van 116
– 17 –
Chemical Feeder Installations
This machine must be operated with an automatic detergent feeder, including a visual means
to verify that detergents are delivered or a visual or audible alarm to signal if detergents
are not available for delivery to the washing system. Chemical feeders are supplied and
installed by others.
The PW10n-BAS, PW10n-ADV and PW12n-ADV models have a 21-gallon wash tank capacity
and use 1.2 gallons of rinse water per cycle. The PW10n-ADVSW and PW12n-ADVSW
models have a 21-gallon wash tank capacity and use 1.47 gallons of rinse water per cycle.
The PW20n-BAS and PW20n-ADV models have a 34-gallon wash tank capacity and use
2.35 gallons of rinse water per cycle. This information is used when setting the detergent
and rinse aid pumps for proper chemical concentrations.
All PWn models provide an electrical connection point which supplies line voltage power to
an external chemical dispenser (provided and installed by others). The maximum rating for
the chemical dispenser connected to CPS1 and CPS2 is 1.0 amps.
Detergent Feeder (By Others)
The maximum rating for a detergent dispenser connected to DPS1 and DPS2 is
1.5 amps at line voltage.
If installing a detergent feeder (by others), remove cap to expose 7/8” diameter hole at rear
of machine.
NOTE: PW12n-ADV and PW12n-ADVSW models come equipped with a detergent
tting installed at the factory (Fig. 15).
Fig. 15
DETERGENT
FITTING
Bekijk gratis de handleiding van Hobart PW10N-ADV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | PW10N-ADV |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 27655 MB |
