Hobart LXNR-2 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 4 van 32

– 4 –

Installation, Operation and Care of

LXn / LXGn SERIES DISHWASHERS

SAVE THESE INSTRUCTIONS

GENERAL

The LXn / LXGn series dishwashers are fully automatic, front-loading dishwashing machines. The LXn / LXGn

series machines are capable of doing 13 to 38 racks per hour, depending on model and cycle selection.

All LXn / LXGn series dishwashers shut down automatically 4 hours after last use to conserve energy.

All LXnH, LXnR and LXGnR dishwashers include Sense-A-Temp

TM

to insure proper hot water temperature during

rinse.

Standard equipment includes two 20" x 20" racks, electronic controls, drain pump, rinse pump, chemical pumps,

MODEL DESCRIPTION

LXnC, LXGnPR Fresh water rinse; low-temperature, chemical-sanitizing models for use

with 6% sodium hypochlorite solution (bleach) as the sanitizing agent*.

Note: If 8.40% bleach is to be used, contact Hobart Service or your

chemical supplier to change the sanitizer pump settings. (Charges may apply.)

LXnH Fresh water rinse with a built-in 70°F rise booster heater. This allows an

incoming water temperature of 110°F.

LXnR, LXGnR Fresh water rinse with an internal energy recovery unit and a built-in 70°F

rise booster heater. Recommended incoming water temperature 55°F to 80°F.

* Sanitizing agent must be used in accordance with the EPA-registered label use instructions.

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Hobart LXNR-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd