Hobart LXNR-2 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 18 van 32

– 18 –

All LXn / LXGn models are equipped with built in chemical pumps. Ensure detergent, rinse aid and sanitizer

detergents, as prescribed by your chemical professional. Closely follow supplier’s instructions.

Close the door. Press the PLAY/POWER button to turn the power on (Fig. 8). If the machine’s door is closed

will check the temperature of the water and if the water is cold, the machine will drain the water out prior

to show progress (Fig. 9).

NOTE:

When washing or in idle mode, the readout displays the wash temperature. During the rinse cycle, the rinse

icon and temperature are displayed. Select the wash cycle per the below machine cycle times chart by

pressing the CYCLE SELECT button. Each wash cycle is followed by an automatic rinse. When the rinse

cycle is complete and the rinse icon turns off, the door can be opened.

For LXnR and LXGnR models, the door must remain closed until the condensing cycle is complete.

A condensing progress bar is displayed during the condensing cycle. Failure to follow these instructions will

result in excess steam and water vapor in the dish room.

Fig. 8

Fig. 9

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Hobart LXNR-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Hobart (Niet gecategoriseerd)

Handleiding bekijken

Hobart 6430

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd