Hobart AM16VL-ADV handleiding
Handleiding
Je bekijkt pagina 20 van 42
– 20 –
Rinse Aid / Sanitizer Dispenser(s)
Terminals RPS1 and RPS2 (Fig. 16) are supplied with controlled machine line voltage.
They are ON during the rinse cycle and OFF between cycles, when machine is in delime
cycle, or when the machine power supply is OFF. Maximum rating for rinse aid dispenser
connected to RPS1 and RPS2 is 1.5 amps at line voltage. Check the machine supply
voltage and use corresponding feeder transformer voltage. Use UL Listed 600 volt minimum
insulated wire for the connections. Do not use bell wire, lamp cord or similar type wire.
Splice connections, if required, must be made in the feeder transformer junction box
(supplied by others) — not in the main controls enclosure. Use 7/8" diameter hole located
at right rear corner of machine for 1/2" trade size conduit tting. Strain relief ttings must
be provided for all wiring.
Bekijk gratis de handleiding van Hobart AM16VL-ADV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | AM16VL-ADV |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7974 MB |
