Hobart 6430 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Afdrukken

Je bekijkt pagina 8 van 60

– 8 –

If the drawer is equipped with a peel trap, remove the peel trap drawer and thoroughly clean the

drawer, as well as the peel trap interior.

The discharge chute MUST be left open when unit is NOT in use to prolong life of the door

seal.

6.3 MOTOR

This machine is equipped with a manual-reset overload protection switch, located on the motor

inside the peeler housing. If, during operation, the motor should overheat and trip this switch,

turn the timer o󰀨 and allow the motor to cool for several minutes. To reset the switch, remove the

top screw from the cover plate (Fig. 3), rotate the cover plate and push the red button (Fig. 3).

Reposition round cover plate and replace top screw in threaded hole.

If the overload protection switch persists in tripping, contact your local Hobart Service O󰀩ce.

RED BUTTON

COVER PLATE

Fig. 3

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Bekijk gratis de handleiding van Hobart 6430, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Hobart (Niet gecategoriseerd)

Handleiding bekijken

Hobart LXNR-2

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd