Hobart 6430 handleiding
Handleiding
Je bekijkt pagina 3 van 60
– 3 –
1.0 SAFETY INFORMATION
The procedures and precautions contained in this manual are understood to apply to the
machinery only when it is used in the prescribed manner. If the machinery is used other than in
the recommended manner, the operator will be responsible for his/her own safety and for the
safety of the other persons who may be involved.
The information in this manual has been prepared to assist the operator to understand,
maintain and operate the peeler. In order to prevent accidents, read, understand and follow all
the precautions and warnings contained in this manual before installation or operating for the
rst time. This manual must be studied to obtain a clear understanding of the peeler and its
capabilities.
1.1 SAFETY GUIDELINES
Ensure sucient precautions are observed during manual handling of the peeler, particularly
when moving into position on the installation. Reference must be made to manual handling
regulations.
• Do not pressure clean this appliance. It is vital to adhere to the cleaning instructions detailed
in this manual.
• Do not remove any covers or loosen any ttings whilst the machine is operating.
• Ensure this manual is kept in an easily accessible place for future reference near the
peeler.
• All operators must be trained in the safe operation of the peeler.
• Ensure the power supply has been disconnected before attempting to service or move the
peeler.
• Rotating machinery and electricity are potentially hazardous and may cause injury if
sucient precautions are not taken prior to operating or servicing the machine.
• Always have your peeler regularly serviced; at least twice a year, depending on frequency
of use.
1.2 WARNING SYMBOLS
To identify the safety messages in this manual, the following symbols have been used.
The “Warning” symbol is found primarily where the corresponding information is
important for the safe use of the machinery.
The electrical hazard symbol is used when there are risks of an electrical nature. Prior
to servicing the machinery, always disconnect the power from the mains supply.
Bekijk gratis de handleiding van Hobart 6430, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | 6430 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8849 MB |
