H.Koenig TWT99 handleiding
Handleiding
Je bekijkt pagina 7 van 77
● After cleaning, please continue to run for 10s to suck the residual water of the pipeline to the sewage tank,
otherwise the residual water of the pipeline will leak out through the nozzle
● After shutdown and cleaning, please press and hold the water jet switch button to release the hot water or
steam in the pipe, otherwise it may cause injury
● When using hot water and steam, pay special attention to safety, scald risk
● This machine is not a toy, do not let children play or sit on the main machine
● Do not use this machine at ambient temperature below 0℃ or above 50℃
● It is strictly prohibited to transform the whole machine and accessories
Maintenance：
1. Sewage tank cleaning:
In order to maintain product performance, please clean the sewage tank regularly. If there is
too much sewage in the sewage tank, the suction of this product will be weakened, and the
sewage tank should be cleaned in time when the water level reaches the maximum water level.
Sewage tank disassembly method: Pull the sewage tank upward, you can remove the
sewage tank as a whole, and then press the sewage tank button, open the lid, you can clean the
sewage tank.
Tip: It is recommended to perform the above cleaning after each use of this product.
2. Clean water tank:
When the water tank is short of water, please add water in time;
Adding water method: Turn off the machine, remove the clean water tank, open the water tank
cover and add water
Clean water tank disassembly method: pull the clean water tank inclined upward to remove the
whole clean water tank
Bekijk gratis de handleiding van H.Koenig TWT99, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | H.Koenig |
| Model | TWT99 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 13163 MB |