HK Audio SI SERIES P10J TR handleiding
Handleiding
Je bekijkt pagina 17 van 31
- 17 -
• English
Operating and Installation Instructions 1.0SI SERIES P10
5 Mounting instructions for
mechanical accessories
The following mounting instructions for mechanical
accessories apply only to use with the P10 speakers. Only
original HK Audio accessories may be used. Care must be
taken to use appropriate tools to perform the installation.
The general safety instructions apply.
5.1 U-Bracket
M6
M8
M6
M8
55
86
45,5
300
350
1.) The two mounting brackets must be screwed to the enclosure.
The M5 pan-head screws already present in the enclosure must
be used for this purpose.
2.) Attach the U-bracket to the desired surface, e.g. a wall. Holes
are provided for 6 mm or 8 mm diameter screws. To facilitate
an exact alignment, the 6 mm fixing points are designed as
horizontally or vertically aligned slotted holes.
3.) Before hooking the speaker with the mounting brackets into
the U-bracket, the two M8 lock washers ("RIPP LOCK") must be
placed on the threaded rods of the U-bracket.
4.) The speaker can then be hooked into the U-bracket. The actual
screwing is done by applying the two self-locking nuts.
5.) The nuts must be tightened until the locking washers ("RIPP
LOCK") are firmly stamped into the material. A torque of
approx. 25 Nm is necessary for this.
6.) Three further M5 threaded holes in the U-bracket can be used
later to secure or fasten connecting cables.
7.) If desired, the loudspeaker line can be extended with additional
P10s. In this case, the connector plates must be used (see 5.2).
1
3
3
3
3
4
5
2
4
5
1
3
3
3
3
Note: If the lock washers ("RIPP LOCK") are not
used at all or not suciently tightened, the ball impact
safety certificate according to DIN 18032-3 is invalid. So
please always ensure correct assembly based on these
instructions.
pos. description qty.
1 Mounting bracket 2
2 U-bracket 1
3 M5 pan-head screw 8
4 M8 nut, self-locking 2
5 M8 lock washer (RIPP LOCK) 2
4
5
2
4
5
120°
65
230
180
230
5 Mounting instructions for mechanical accessories
Bekijk gratis de handleiding van HK Audio SI SERIES P10J TR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HK Audio |
| Model | SI SERIES P10J TR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4304 MB |
