HK Audio SI SERIES P10J TR handleiding
Handleiding
Je bekijkt pagina 15 van 31
- 15 -
• English
Operating and Installation Instructions 1.0SI SERIES P10
Example #2:
Connecting four 16 ohm speakers in parallel results in a connected load of 4 ohms.
=
1
(
1
16 Ω
)
+
(
1
16 Ω
)
+
(
1
16 Ω
)
+
(
1
16 Ω
)
= 4 Ω
4.6 Connecting multiple P10i TR or P10j TR to one power amplifier channel
The P10i TR or P10j TR are designed with a built-in transformer for connection to high-impedance line
networks (100 V/70 V). To determine the maximum permissible quantity of P10i TR or P10j TR speakers
on the same power amplifier channel, the connected power taps must be summed and compared with
the power data of the amplifier used.
The sum of the power taps must not exceed the maximum power of the amplifier.
The manufacturer's specifications of the respective amplifier manufacturer or the project-specific
planning documents including the respective cable system apply.
The following examples represent the maximum permissible number of P10x TR loudspeakers for an
amplifier with a maximum power of 500 W/100 V:
Example #1:
Connecting three P10x TR speakers in parallel to the 150 W power tap results in a maximum power of
450 W to be considered. Thus, operation on an amplifier with a maximum power of 500 W/100 V would
be permissible with some "reserve".
4 Electrical connections
Bekijk gratis de handleiding van HK Audio SI SERIES P10J TR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HK Audio |
| Model | SI SERIES P10J TR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4304 MB |
