HK Audio SI Series P10i handleiding
Handleiding
Je bekijkt pagina 8 van 31
- 8 -
• English
Operating and Installation Instructions 1.0SI SERIES P10
2.3 Swivel and tilt bracket for one loudspeaker
In applications where precise alignment and tilting to the audience
areas required, this swivel and tilt mount is used. It supports a
single P10 loudspeaker.
2.4 Swivel and tilt bracket for two loudspeakers
This large swivel and tilt bracket supports two P10 speakers and
allows their precise alignment and tilt to the desired audience
areas.
2.5 Rigging Rail
A rigging rail is available for the flown fixed installation, which
supports up to three P10 loudspeakers. The speakers are
connected to each other using the P10 connector plates (see 2.2).
An L-sheet is available for attaching lashing ropes or anti-twist
devices.
2.6 Pole Support
For permanent installation on pipes, columns, poles or trusses, the
P10 pole supports are the suitable solution. Note: The necessary
lashing straps are not oered by HK Audio.
2.7 Ceiling Mount
A ceiling mount with concealed cable routing in the tube is
available for mounting to a ceiling and subsequent alignment to
the audience areas below. One ceiling mount supports up to two
P10 loudspeakers.
2 Mechanical accessories
Bekijk gratis de handleiding van HK Audio SI Series P10i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HK Audio |
| Model | SI Series P10i |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4304 MB |
