HK Audio Linear 5 MK II Lounge Pack handleiding

Speaker

HK Audio

44 pagina's

PDF beschikbaar

Handleiding

LINEAR 5 MK II 1.0

• English • Français• Deutsch • Italiano • Español• English • Français• Deutsch • Italiano • Español

●

Data

This LED lights up orange when data is being transferred via the network

socket.

●

Preset

Use the Preset selection button to call up factory presets or a user preset

you can conﬁgure via the remote DSP CONTROL software. Tap the select

button once to scroll through Presets 1 through 4.

A separate manual explains how to program the four remote user presets.

You will ﬁnd it on the LINEAR5 MK II download page at www.hkaudio.com.

Preset overview:

LINEAR 5 MK II

110 XA, 112 XA, 115 XA

LINEAR 5 MK II

112 FA, 115 FA

LINEAR 5 MK II

115 Sub A, 118 Sub A

1 Flat Flat Front

2 Monitor Boost Cardioid 1:1 vertical

3 Low Cut Low Cut Cardioid 1:1 hori-

zontal

4 Remote (to access stored settings via the remote HK Audio DSP

CONTROL software)

The LINEAR 5 MK II XA/FA models’ factory presets:

Flat Delivers linear response across the full frequency range

Monitor Optimised to dampen the extra bass generated by ﬂoor cou-

pling when you set a speaker on its side for use as a monitor

Boost Enhances low-frequency response when used as a stan-

dalone speaker without a subwoofer.

Low Cut A high-pass ﬁlter optimises the unit for use as a mid/high

unit paired with the LINEAR 5 MKII 115 Sub A or 118 Sub A

The LINEAR 5 MK II 115 Sub A and 118 Sub A's factory presets

Front Standard operating mode for a forward-facing subwoofer

Cardioid 1:1

vertical

For cardioid setups with two stacked subwoofers with one

forward-facing LINEAR 5 MKII subwoofer. (see section 4.2 for

more on this)

Cardioid 1:1

horizontal

For cardioid setups with two side-by-side subwoofers with

one forward-facing LINEAR 5 MKII subwoofer (see section

4.2 for more on this)

Factory presets 1 to 3 address the speaker only and not the DSP Out.

Note: If you are operating the speaker in a network connected to

the remote DSP CONTROL software, you can conﬁgure the DSP Out

independently even when using factory presets 1 to 3. To learn more

about this, consult the separate DSP CONTROL manual. You will ﬁnd it

on the LINEAR 5 MK II download page at www.hkaudio.com.

The Remote Preset

Remote This lets you call up a user preset that you previously stored

via DSP CONTROL for the speaker as well as for the DSP

Out. The speaker does not need to be connected to the

remote software to do this.

The remote preset’s default setup is identical to factory preset 1 (Flat/

Front).

You can access the following DSP functions via the remote DSP CONTROL

software and save your settings in user presets:

Fully parametric 10-band EQ with variable ﬁlter characteristics for each fre-

quency band, high-pass and low-pass ﬁlters with variable ﬁlter characteris-

tics, Limiter, Delay, Polarity, Level, and Mute.

You can conﬁgure these parameters separately and independently for the

speaker and its DSP Out.

Screenshot of the remote DSP CONTROL software. You can download this software free of charge from

the LINEAR 5 download page at www.hkaudio.com. The speaker and DSP Out parameters are identical,

but the double DSP power lets you configure each set independently.

●

Power

This rocker switch turns the power on and o. Set

it to Power to turn the electronic components on

and to O to disconnect them from the mains

power supply.

●

Power LED

As soon as the electronic components are supplied

with voltage, this LED lights up green.

●

Mains Input

The mains connection is designed as a lockable IEC 14 socket. In combina-

tion with the supplied lockable connection cable, the mains cable is locked

and secured against accidental slipping out.

Leave enough space for proper ventilation!

LINEAR 7

118 Sub A

MADE IN GERMANY

Power

Auto Sleep

On Off

+6 dB–6 dB

0 dB

Input

DSP Out

Thru Gain

Serial No.

Caution: Risk of electric shock! Do not open!

Refer servicing to qualiﬁed service personnel.

Attention: Risque de choc élèctrique –

ne pas ouvrir!

HK Audio is a brand of Stamer Musikanlagen GmbH

Magdeburger Str. 8 • 66606 St. Wendel • Germany

Mains Input

100-240 V~ 50-60 Hz

1 A @ 1/8 output power

Power

1 2

●

Auto Sleep

Use this recessed button to switch energy-saving Auto Sleep mode on and

o. Your speaker leaves the factory with the Auto Sleep button pressed to

enable this mode. This function puts the electronic components into Auto

Sleep mode when four and a half hours pass without the speaker register-

ing an audio signal, data sent to the network ports, or operation of a button

or knob on the electronics. The only way to wake it up is by switching the

Power button o and on again or patching an analogue audio signal into

the Input.

Heads Up: You cannot wake up the speaker via the network ports.

The only way to disable the Auto Sleep function is to press the recessed

switch (not pressed).

Leave enough space for proper ventilation!

LINEAR 7

118 Sub A

MADE IN GERMANY

Power

Auto Sleep

On Off

+6 dB–6 dB

0 dB

Input

DSP Out

Thru Gain

Serial No.

Mains Input

100-240 V~ 50-60 Hz

1.9 A @ 1/8 output power

Link

100-240 V~ 50-60 Hz

max. 10 A

Caution: Risk of electric shock! Do not open!

Refer servicing to qualiﬁed service personnel.

Attention: Risque de choc élèctrique –

ne pas ouvrir!

HK Audio is a brand of Stamer Musikanlagen GmbH

Magdeburger Str. 8 • 66606 St. Wendel • Germany

Power

Lock

1 2

Bekijk gratis de handleiding van HK Audio Linear 5 MK II Lounge Pack, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.