HK Audio LINEAR 5 LTS A handleiding
Handleiding
Je bekijkt pagina 7 van 36
LINEAR 5 LTS A 1.1
7
Cluster / Head Stack Cluster
You can extend horizontal coverage to around 140° by clustering two
LINEAR 5 LTS As. To this end, place them side by side with a 30° angle of
splay (around 24 cm as pictured) between the two to minimize frequency
cancellation and phasing e ects.
An optional accessories kit
with a pick point and a cluster
plate is available if you wish to
fl y this cluster. It provides two
anchor points for attaching
rigging hardware such as steel
cables or slings, connects the
two housings and prevents
them from sliding apart.
If you wish to stack the system, we recommend that you do so as
follows:
Center the cluster on the top subwoofer in a stack of three SUB L 4000 As,
and then aim it horizontally to cover the target area. Be sure to maintain
that 30° angle of splay.
Follow the same procedure for a head stack cluster.
You can also secure the cluster in the usual way using ratchet straps for
added safety.
5 Technical Specifi cations
Model LTS A
Frequency response +/– 3 dB 115 Hz – 14 kHz
Frequency response –10 dB 100 Hz – 20 kHz
Max. SPL@10% THD 133 dB half space
Max. SPL Peak@10% THD 138 dB half space
Max. SPL calc. 141 dB half space
Amp/type Class D biamped
Power output, amp 1000 W
Amp to driver 350 W @ 4 ohms
Amp to woofer 650 W @ 4 ohms
Protective circuits, amp Under-voltage, thermal, short-circuit,
and over-current protection
Protective circuits, speakers Subsonic 24 dB / oct., peak limiter
Power consumption 3.3 A / 230 V nominal pursuant to
EN60065
Input sensitivity +4 dBu @ Gain center-notched / L5
System Level
Audio ports XLR / 1/4"(6.3 mm) jack combo In,
XLR Thru
Mains connector 1x IEC socket with V-Lock cord retainer
Woofers 3x 8" (16 ohms) with 1.5" voice coil
(neodymium)
HF driver 1x 1" (16 ohms) with 1.7" voice coil
Horn directivity 60° x +5°/–25° MCT horn
Crossover frequency 1.7 kHz FIR X-over with 24 dB/oct.
Pole mount MonoTilt 0°
Rigging/ pick points 5x M8
Grips 2 integrated
Optional accessories Protective cover, Tilt Bracket, Tilt
Bracket Extension, Head Stack
Clustering Plate, AP-8
Housing Birch 15/18 mm multiplex, 9/13-ply
Front grille 2 mm metal grille backed with acoustic
foam
Finish Acrylic enamel, black
Dimensions (WxHxD) 44 x 68 x 46,1 cm
17-5/16 x 26-25/32 x 18-5/32"
Weight 24,9 kg / 54,9 lbs.
6 Applications
See the appendix starting on page 32.
70°
140°
70°
30°
approx.
24 cm /
9 1/2"
• English • Français• Deutsch • Italiano • Español
Bekijk gratis de handleiding van HK Audio LINEAR 5 LTS A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HK Audio |
| Model | LINEAR 5 LTS A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6311 MB |
