Handleiding
Je bekijkt pagina 9 van 50
– 9 –
DEHUMIDIFYING OPERATION
Use the device for dehumidifying when the room temperature is over 16°C.
When it is under 15°C, the dehumidifying function will not work.
■ Dehumidifying Function
When the room temperature is higher than the temperature setting: The device will dehumidify the room
and reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at the
temperature setting slightly lower than the current room temperature, regardless of the temperature setting.
The function will stop (the indoor unit will stop emitting air) as soon as the room temperature becomes lower
than the setting temperature. You might feel a bit colder in dehumidifying operation.
■ As the settings are stored in memory in the remote controller, you
only have to select (DEHUMIDIFY) then press the
button next time.
Set the desired room temperature with the TEMPERATURE
button (the display indicates the setting).
The range of 20 ~ 26˚C is recommended as
the room temperature for dehumidifying.
Press the selector button so that the display indicates
(DEHUMIDIFY).
The FAN SPEED is set at SILENT or LOW automatically.
The FAN SPEED button can be used to change between
SILENT and LOW only.
1
Press the button. Dehumidifying operation starts with
a beep. Press the button again to stop the operation.
START
2
Bekijk gratis de handleiding van Hitachi RAK-QH18PCBST, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hitachi |
| Model | RAK-QH18PCBST |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6659 MB |
