Handleiding
Je bekijkt pagina 22 van 50
– 22 –
2. CLEANING OF FRONT PANEL
CAUTION
● Never use hot water (above 40°C), benzine, gasoline, acid, thinner
or a brush, because they will damage the plastic surface and the
coating.
Removing the Front Panel
1. Push the end of the right-side arm outward
to release the right tab.
2. Move the left-side arm outward to release
the left tab and then pull the panel towards
you.
Attaching the Front Panel
1. Insert the shaft of the left arm along the step
on the unit into the hole.
2. Securely insert the shaft of the right arm
along the step on the unit into the hole.
3. Make sure that the front panel is securely
attached an then close the front panel.
!
● Remove the front panel and wash with clean water.
Wash it with a soft sponge.
After using neutral detergent, wash thoroughly with
clean water.
● When front panel is not removed, wipe it with a soft
dry cloth. Wipe the remote controller thoroughly with
a soft dry cloth.
● Wipe the water thoroughly.
If water remains at indicators or signal receiver of
indoor unit, it causes trouble.
Method of removing the front panel.
Be sure to hold the front panel with both hands to
detach and attach it.
Bekijk gratis de handleiding van Hitachi RAK-QH13PCBST, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hitachi |
| Model | RAK-QH13PCBST |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6659 MB |
