Hitachi PV-XH4P handleiding
Handleiding
Je bekijkt pagina 26 van 140
EN-22
1. After cleaning is done, turn off the device and put it on the Stand tray
2. Turn on the vacuum cleaner.
3. Press the button continuously until wet mode blinks, then the process
will start.
4. Push the spray button to spray the water to cleaning brush.
5. The self-cleaning process takes 2.5 minutes to complete, and the blinking
wet mode will turn off.
6. If you want the brush bristles to be drier. Press the button until the
self-cleaning process starts again without pressing the spray button.
Vacuum efficiently and thoroughly by moving the power head back and forth across floor.
Use in accordance with the hard floor type
Use Self Cleaning
CAUTION
Risk of damage to the floor
After extended use, the brushes, wheels, and rotary brush might
wear down. Using the power head while they are worn out might
damage the floor. You cannot replace the brushes or wheels by
yourself. Please contact a Hitachi authorized
service agent to have the brushes, wheels,
and rotary brush replaced as a set.
Do not move the power head left and
right while they are facing forward.
Do not pull the power head backwards
while holding it aloft.
WARNING
Risk of injury
Do not place the power head on parts of your body (on top of your feet, etc.)
when pulling the power head.
It might get your body parts caught in the rotary brush.
CAUTION
Risk of electric shock, fire, malfunction or damage.
Do not use the unit to vacuum water or damp areas without the Wet power brush attached,
as this may damage the unit.
Bekijk gratis de handleiding van Hitachi PV-XH4P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hitachi |
| Model | PV-XH4P |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 29352 MB |
