Hitachi PV-XH4P handleiding
Handleiding
Je bekijkt pagina 18 van 140
EN-14
Using the vacuum cleaner
Hold the handle and pull the vacuum cleaner upward.
Attach an attachment. → (P.EN-8)
Charge the vacuum cleaner after using it.
→ (P.EN-12)
Press the button to change operation mode.
Holding onto the connector of the AC adapter,
disconnect it from the vacuum cleaner.
Handle
Release button
If the vacuum cleaner is set on the charging station.
If the AC adapter is directly connected to the vacuum cleaner.
CAUTION
CAUTION
When disconnecting the AC adapter, hold the
connector. Do not pull on the cord.
Pulling on the cord might damage the cord and cause
short-circuiting, resulting in electric shock or fire.
Risk of injury or damage to the floor.
Do not strongly press or hit the vacuum cleaner against the floor.
The vacuum cleaner might be deformed or the dust case might fall.
When replacing an attachment, remove it by sliding the release
button in the direction of the arrow and pulling the attachment
in the direction of the arrow.
Low: For normal cleaning. Mid: For gentle carpet cleaning.
High: For powerful cleaning in heavily dirty areas.
Continuous operating time can be found in the specifications.
Note that the usage time may vary depending on the environment and usage.
When you need to start again after stopping, please wait 3 seconds
before starting.
Remove the connector of the AC
adapter from the vacuum cleaner.
Remove the vacuum cleaner
from the charging station.
Note
Do not remove the battery from the vacuum cleaner
while operating. Doing so might cause malfunctions.
Terminal
Connector
Press and hold the button to start and press
again to stop.
Bekijk gratis de handleiding van Hitachi PV-XH4P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hitachi |
| Model | PV-XH4P |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 29352 MB |
